Stealth Cam STC-I840IR Rogue-IR - Manual (Page 24)

STC-I840IR
www.stealthcam.net Toll Free 877-269-8490
24
Using Your Camera
Once all program settings have been completed, your Stealth Cam is
ready for field use. To begin, slide the power toggle switch from Test
setting mode to the On position.

Please note that when you power off the camera, the front
LCD counter will remain on. This is normal.
Getting Started With Your Camera
Mounting Your Camera
It is recommended to mount the camera 4~5 feet off the ground with
the camera pointed at a slight downward angle. Avoid mounting the
camera facing East or West as the rising and setting of the sun may
produce false triggers and overexposed images. Clear branches and
other debris away from the front of the camera so as not to block the
camera lens or PIR sensor.