Stealth Cam STC-I840IR Rogue-IR - Manual (Page 30)

STC-I840IR
www.stealthcam.net Toll Free 877-269-8490
30
Manual Shooting Mode
Using Manual Shoot Option in Still image mode

Slide the power toggle switch to TEST position. You will hear
two short consecutive beeps followed by a third beep.

Press the MENU button once. The Camera icon will flash.

For still image capturing, press OK to select this option and
press Menu to exit to status screen.

Camera icon will stop flashing on the LCD screen to indicate
still image mode.

Point and hold the camera steady in the direction to capture an
image, and press the SHUTTER button once. Wait for the one
short beep follow by two consecutive beeps. This indicates the
image has been captured, and the LCD counter will update the
number of images in memory.