Stealth Cam STC-I840IR Rogue-IR - Manual (Page 37)

STC-I840IR
www.stealthcam.net Toll Free 877-269-8490
37
Formatting Memory Card
To erase images stored in memory, or to format an SD card:
Slide the power switch to TEST position. You will hear two short
consecutive beeps followed by a third beep.

Press Menu button once.

Press the Down button once.

The Trash icon will flash. Press OK to confirm you want to
format the memory.
 The word “no” and the Trash icon will be flashing. If at this time
you decide not to proceed with the formatting of the memory,
press OK to exit. Otherwise press the Left button once. The
word “YES” and the Trash icon will flash. Press OK to confirm
you want to proceed with formatting the memory.