Stealth Cam STC-I840IR Rogue-IR - Manual (Page 22)

STC-I840IR
www.stealthcam.net Toll Free 877-269-8490
22
Press OK to confirm.
To Program AVI clip Mode:
Slide the power switch from Off to Test position.
You will hear 2 consecutive short beeps follow by a 3
rd
beep. Press
Menu button once, then press the Right Button once. You will see the
Movie icon flashing. Press O.K. to confirm this option.
Now press the Down button six times to scroll through all of the icon
settings. You will now see the AVI length setting digits flashing.
Press Right button to select from 10 seconds to 180 seconds of video
clip each time the camera is triggered.
Press OK to confirm your AVI length setting.
Press the Down button to select the Time Out interval in minutes (1-60
min).
Press the Right button to increase the time interval by one minute
increment or press the Left button to decrease the time interval by one
minute increment.
Press OK to confirm.