Tweco CutMaster 101 with SL100SV User Manual
Page 102
SERVICE
5-38
Manual 0-4642
5
8. Install replacement components as follows:
For Input Diodes:
Diode
Assembly
Art # A-03950
Thermal Pad
Slot
Input Diode Replacement
a. Apply the thermal pad to the flat surface of the diode. Align the pad with the rectangular flat surface on the back of
the device.
b. Align the diode horizontally, with its longer edges perpendicular to the power supply base.
c. Secure the device and rectangular pad to the chassis with the replacement screws and washers.
9. Torque screw(s) to 35 in-lb. (3.95 Nm).
NOTE
Failure to torque properly will cause component damage.
10. Connect wires per the chart.
Input Diode To Main PCB
Input Diode
To Main PCB
E5
E1
E5
E1
E13
E2
E13
E2
E18
E2
E18
E3
E6, E8
E7
E6, E8
E7
E14, E16
E15
E14, E16
E15
CutMaster 101
Input Diode Connections
208/230V Units
400V, 415V, 460V, 600V Units