Tweco CutMaster 101 with SL100SV - Manual (Page 35)

Manual 0-4642 3-11 INSTALLATION
3
3.08 Power Supply Connection to SC-11 Standoff Control
The power supply includes an Automation Interface PC Board connected to a CPC connector on the power supply rear panel.
For connection to the Thermal Dynamics SC-11 Standoff Control, align and connect the cable from the Standoff Control to the
CPC connector. Check for a secure connection.
CPC Connector for
Thermal Dynamics CNC Controller
Art # A-04075
Connector for SC-11
Standoff Control / CNC