Tweco A120 CutMaster - Manual (Page 30)

CUTMASTER A120
INSTALLATION Manual 0-4989 3T-2
The Automation and Machine torch include a positioning tube
with rack and pinch block assembly.
1. Mount the torch assembly on the cutting table.
2. To obtain a clean vertical cut, use a square to align the
torch perpendicular to the surface of the workpiece.
A-02585
Workpiece
Square
Pinch Block
Assembly
Automated and Machine Torch Set - Up
3. The proper torch parts (shield cup, tip, start cartridge,
and electrode) must be installed for the type of opera-
tion. Refer to Section 4T.08, Torch Parts Selection for
details.