Tweco 1000 Merlin(Dec2004) - Manual (Page 34)

INSTALLATION 3-16 Manual 0-2708
3.13 Optional Remote Arc Starter
A. Mounting Arc Starter Box
Mount the Arc Starter Box to the cutting table gantry as fol-
lows:
1. Remove the four screws securing the cover to the base
assembly of the Arc Starter Box.
Screws
(Four Places)
A-02279
Figure 3-19 Cover Screw Removal
2. Slide the cover up and off the base assembly.
A-02280 Base Assembly
Cover
Figure 3-20 Cover Removal
3. Mount the base assembly of the Arc Starter Box to the cutting
table gantry using the four holes provided in the base.
NOTE
The last page of this Manual has a full size hole
template for use in locating the mounting holes.
Four Mounting Bolts And
Washers (Customer Supplied)
A-02281
Base
Assembly
To Plasma
Power Supply
To Torch
Figure 3-21 Mounting Bolt Installation