Tweco PCM - 102 Machine Torch - Manual (Page 62)

APPENDIX A-6 Manual 0-2818
Application Electrode Gas Distributor Tip Shield Cup
Drag Cutting 9-8407 8-7501 8-7503 8-7500
Cutting (without Standoff Cup) 9-8407 8-7501
8-7503 (40A)
or 9-7726 (60A)
8-7500
Cutting (with Standoff Cup) 9-8407 8-7501 9-7726 8-7500
Gouging 9-8407 8-7508 8-7506 8-7500
Consumable Matrix For CutMaster 75
APPENDIX 4: CUTMASTER 75 SYSTEM DATA
Cut Quality on Various Materials and
Thicknesses
The following table defines the cut quality on various
materials and thicknesses:
Cut Quality on Various Materials
Material Type of Type of Cut
Thickness Material Gas Characteristics
Carbon Steel Air Good - Excellent
Stainless Air Good - Excellent
Aluminum Air Good - Excellent
Gage
to
3/4 inch
Description of Cut Characteristics:
Excellent - Minimum bevel (0 - 4°), minimum kerf (2 x tip
orifice diameter), little or no dross, smooth cut
surface.
Good - Slight bevel (0 - 10°), slightly wider kerf (2-1/2 x
tip orifice diameter), some dross (easily removed),
medium-smooth cut surface, slight top edge round-
ing.
Cutting Range
Material Most Metals
Up to 3/4 inch (19 mm)
Speed 9 ipm (0.23 mpm)
Pierce Rating
Material Carbon Steel
Thickness 3/8 inch (9.5 mm)
Transfer Distance 1/4 inch (6.3 mm)
Gouging
Width 3/16 inch (4.76 mm)
Depth 1/8 inch (3.18 mm)
Number Passes Single
Speed 20 ipm (0.5 mpm)
Bevel Cut Capability
Degrees 0° to 45°
Material Thickness 1/2 inch (13 mm)
Gas Requirement
Type Gas Air
Operating Pressure 70 psi (4.8 bar)
Max Input Pressure 125 psi (8.6 bar)
Cutting & Gouging
Total Flow
400 scfh (190 lpm)
Torch Specifications For
CutMaster 75 Power Supply