Tweco 12mm Cutmaster - Manual (Page 42)

Statement of Warranty
LIMITED WARRANTY: Subject to the terms and conditions established below, Victor Technologies warrants to the original retail purchaser that new
Thermal Dynamics CUTMASTER ® plasma cutting systems sold after the effective date of this warranty are free of defects in material and workmanship.
Should any failure to conform to this warranty appear within the applicable period stated below, Victor Technologies shall, upon notification thereof
and substantiation that the product has been stored operated and maintained in accordance with Victor Technologies’s specifications, instructions,
recommendations and recognized industry practice, correct such defects by suitable repair or replacement.
This warranty is exclusive and in lieu of any warranty of merchantability or fitness for a particular purpose.
Victor Technologies will repair or replace, at its discretion, any warranted parts or components that fail due to defects in material or workmanship
within the time periods set out below. Victor Technologies must be notified within 30 days of any failure, at which time Victor Technologies will
provide instructions on the warranty procedures to be implemented.
Victor Technologies will honor warranty claims submitted within the warranty periods listed below. All warranty periods begin on the date of sale of
the product to the original retail customer or 1 year after sale to an authorized Victor Technologies Distributor.
LIMITED WARRANTY PERIOD
Product
Power Source Components
(Parts and Labor)
Torch and Leads
(Parts and Labor)
CUTMASTER 10mm 3 Years 1 Year
CUTMASTER 12mm 3 Years 1 Year
This warranty does not apply to:
1. Consumable Parts, such as tips, electrodes, shield cups, o-rings, starter cartridges, gas distributors, fuses, filters.
2. Equipment that has been modified by an unauthorized party, improperly installed, improperly operated or misused based upon industry standards.
In the event of a claim under this warranty, the remedies shall be, at the discretion of Victor Technologies:
1. Repair of the defective product.
2. Replacement of the defective product.
3. Reimbursement of reasonable costs of repair when authorized in advance by Victor Technologies.
4. Payment of credit up to the purchase price less reasonable depreciation based on actual use.
These remedies may be authorized by Victor Technologies and are FOB West Lebanon, NH or an authorized Victor Technologies service station.
Product returned for service is at the owner’s expense and no reimbursement of travel or transportation is authorized.
LIMITATION OF LIABILITY: Victor Technologies shall not under any circumstances be liable for special or consequential damages such as, but not
limited to, damage or loss of purchased or replacement goods or claims of customer of distributors (hereinafter “Purchaser”) for service interruption.
The remedies of the Purchaser set forth herein are exclusive and the liability of Victor Technologies with respect to any contract, or anything done
in connection therewith such as the performance or breach thereof, or from the manufacture, sale, delivery, resale, or use of the goods covered by
or furnished by Victor Technologies whether arising out of contract, negligence, strict tort, or under any warranty, or otherwise, shall not, except as
expressly provided herein, exceed the price of the goods upon which liability is based.
This warranty becomes invalid if replacement parts or accessories are used which may impair the safety or performance of any Victor
Technologies product.
This warranty is invalid if the Thermal Dynamics product is sold by non-authorized persons.
Effective March 15, 2011