Tweco 250 Weldskill MIG - Manual (Page 19)

2-7 Manual No 0-5072
INTRODUCTION welDskIll 250, 350
December , 2008
2.10 Optional Accessories
Part Number Description
W403200 Feed Roll 0.6 / 0.8 HARD
W40320 Feed Roll 0.8 / .0 HARD
W403202 Feed Roll .0 / .2 HARD
W403204 Feed Roll .2 / .6 HARD
W403205 Feed Roll .0 / .2 SOFT
W403207 Feed Roll .2 / .6 SOFT
W403208 Feed Roll 0.8 / .0 CORED
W403209 Feed Roll .0 / .2 CORED
W4032 Feed Roll .2 / .6 CORED
W40322 Feed Roll .6 / 2.0 CORED
W40324 Geared Adaptor
W40325 Feed Roll Adaptor
W40326 Plain Pressure Roll (top)
Table 2-3 Optional Accessories for 250
Part Number Description
W403200 Feed Roll 0.6 / 0.8 HARD
W40320 Feed Roll 0.8 / .0 HARD
W403202 Feed Roll .0 / .2 HARD
W403204 Feed Roll .2 / .6 HARD
W403205 Feed Roll .0 / .2 SOFT
W403207 Feed Roll .2 / .6 SOFT
W403208 Feed Roll 0.8 / .0 CORED
W403209 Feed Roll .0 / .2 CORED
W4032 Feed Roll .2 / .6 CORED
W40322 Feed Roll .6 / 2.0 CORED
W40324 Geared Adaptor
W40325 Feed Roll Adaptor
W40326 Plain Pressure Roll (top)
Table 2-4 Optional Accessories for 350
NOTE
Four feedrolls are required for each electrode wire size used.