Tweco 400i Transmig - Manual (Page 12)

TRANSMIG 400 i
1-6 July 18, 2008
1.03 DECLARATION OF CONFORMITY
Manufacturer: CIGWELD
Address: 71 Gower St, Preston
Victoria 3072
Australia
Description of equipment: Welding Equipment (GMAW, MMAW, GTAW). Including, but not limited to CIGWELD
Transtig 200 Pi, Transtig 200 AC/DC, Transarc 300 Si, Transtig 300 Pi, Transtig 300 AC/DC, Transmig 400 i and
associated accessories.
Serial numbers are unique with each individual piece of equipment and details description, parts
used to manufacture a unit and date of manufacture.
The equipment conforms to all applicable aspects and regulations of the ‘Low Voltage Directive’ (Directive
73/23/EU, as recently changed in Directive 93/68/EU and to the National legislation for the enforcement of the
Directive.
National Standard and Technical Specifications
The product is designed and manufactured to a number of standards and technical requirements among them
are:
• AS/NZS 3652-(EMC Directive EN50199) applicable to arc welding equipment - generic emissions and
regulations.
• EN60974-1 applicable to welding equipment and associated accessories.
• AS60974.1 applicable to welding equipment and associated accessories.
Extensive product design verification is conducted at the manufacturing facility as part of the routine design
and manufacturing process, to ensure the product is safe and performs as specified. Rigorous testing is
incorporated into the manufacturing process to ensure the manufactured product meets or exceeds all design
specifications.
CIGWELD has been manufacturing and merchandising an extensive equipment range with superior performance,
ultra safe operation and world class quality for more than 30 years and will continue to achieve excellence.