Tweco FP-260 - Manual (Page 5)

3. People with pace-makers or hearing aides should keep far from the power source. In particular cases, special
protection measures may be required.
Reduce interference by following these suggestions:
1. If there is interference in the power source line, mount an E.M.T. filter between the power supply and the
power source.
2. Shorten the output cables of the power source, keep them together and connected to ground.
3. Securely fasten the panels of the power source in place after performing maintenance.
SAFETY SYMBOLS
Please familiarize yourself with the warning symbols listed on the following pages. These symbols identify
important safety messages in this manual. When you see one of these symbols, be alert to the possibility of
personal injury and carefully read the message that follows.
Indicates that the possibility of electric shock hazard exists during the operation of the step(s) that
follow.
Indicates that the possibility of fire hazard exists during the operation of the step(s) that follow.
Indicates that the helmet must be worn during the step(s) that follow to protect against eye damage
and burns due to flash hazard.
Indicates that the possibility of toxic gas hazard exists during operation of the step(s) that follow.
Indicates that the possibility of being burned by hot slag exists during operation of the step(s) that
follow.
Indicates that eye protection should be worn to protect against flying debris in the following step(s).
Indicates that the possibility of injury or death exist due to improper handling and maintenance of
compressed gas cylinders or regulators.
3