Tweco ArcMaster 401S - Manual (Page 19)

ARCMASTER 401S POWER SOURCE
Manual 0-5345 2-5 INTRODUCTION
NOTE
Note 1: Due to variations that can occur in manufactured products, claimed performance, voltages,
ratings, all capacities, measurements, dimensions and weights quoted are approximate only. Achiev-
able capacities and ratings in use and operation will depend upon correct installation, use, applications,
maintenance and service.
Note 2: The Effective Input Current should be used for the determination of cable size & supply require-
ments.
Note 3: Motor start fuses or thermal circuit breakers are recommended for this application. Check local
requirements for your situation in this regard.
Note 4: Generator Requirements at the Maximum Output Duty Cycle.
Due to large variations in performance and specifications of different brands and types of generators,
Tweco cannot guarantee full welding output power or duty cycle on every brand or type of generator.
Tweco recommends that when selecting a generator, that the particular power source / generator com-
bination be adequately tested to ensure the combination performs to the users expectations.
Note 5: Tweco reserves the right to change product performance and specifications without notice.