Tweco 8-3441 - Manual

Manual 0-4837 1 January 19, 2006
Manual 0-4837
RPT Adapter Kit
Catalog # 8-3441
Installation Instructions
General Information
This kit provides a switch to toggle from "Hand" to "Mach" for use with the Thermal Dynamics ATC Adapter Kit, on
Hypertherm* Powermax* 1000, powermax* 1250, & powermax* 1650 power supplies. Do not use this kit with any other
equipment. Read these instructions before starting the replacement procedure. Keep these instructions for future
reference.
Supplied Parts
The kit includes:
• Toggle Switch and Mounting Bracket Assembly
• Two Screws
• Instructions
Assembly
NOTE:
The following illustration shows proper connections between the Thermal Dynamics 1Torch® ATC adapter harness
and the Toggle Torch Mode Switch (provided in this kit). If you are installing both of these at the same time you must
complete the ATC Adapter Harness installation before proceeding with the Toggle Switch.
Toggle Switch Adapter Kit
Pm1650/1250/1000
6
5
4 7
8
9 12
11
10 1
2
3
Adapter
Fitting Torch
Toggle
Switch
Hand
Mach
Art # 0-07097
82 Benning Street, West Lebanon, NH 03784 USA
(603) 298-5711 • www.thermal-dynamics.com
© 2006 Thermal Dynamics Corp., Printed in USA .
* HYPERTHERM and powermax are registered trademarks of Hypertherm, Inc.