2 using the curb height frame, Figure 11. portal brick-in with adaptor plate – Unitec Portal Installation Manual User Manual

Page 18

Advertising
background image

P O R T A L T I

Portal Installation Manual Rev C

14

Figure 11. Portal Brick-In with Adaptor Plate

2 . 4 . 3 . 2

U s i n g t h e C u r b H e i g h t F r a m e

Follow the base installation instructions in section 2.3 to set the base frame in the
concrete. The adapter plate attaches to the (3) studs on top of the frame with ½” nuts
and washers. Position the frame so the front of the adapter plate will be recessed
4.5” from the front face of the brick (as shown in Figure 12).

Document #: PTL1001

Advertising