Unitec Portal Installation Manual - Manual (Page 9)

P O R T A L T I
Portal Installation Manual Rev C 5
Figure 5. Portal Base Dimensions
The Portal base frame is a welded tubular structure that has the same plate on the
top and bottom. Its designed so that wires and/or conduit can be routed into the
Portal through the round conduit holes on the top. However, it will be far easier to
bring the conduit stubs into the frame through the large rectangular cut outs on the
bottom plate. You can then attach flex conduit between the stubs and conduit holes
on the top panel or just run the wires from the stubs up through these holes.
Document #: PTL1001