Waring FP40C - Manual (Page 25)

To clean and sanitize the motor base:
Clean and sanitize the motor base prior to initial use and after each use. Unplug the unit, then wipe down
the exterior surfaces of the motor base with cloths or sponges dampened with a soluble detergent. Next,
wipe down with rinse water. Prevent liquid from running into the motor base by wringing out all excess
moisture from cloths or sponges before using them.
NEVER IMMERSE THE MOTOR BASE IN WATER OR ANY OTHER LIQUID.
Allow the unit to air-dry before using again.
Never use harsh abrasive-type cleaners on any part of the Commercial Food Processor.