Waring FP40C - Manual (Page 3)

3
GROUNDING INSTRUCTIONS
For your protection, this appliance is equipped with a 3-conductor cordset.
120 volt units are supplied with a molded 3-prong grounding-type plug (NEMA5-15P), and should be used
in combination with a properly connected grounding-type outlet as shown in Figure A.
If a grounding-type outlet is not available, an adapter, shown in Figure B, may be installed to allow a
3-prong plug to be used in a 2-slot wall outlet.
Ground the adapter by attaching its grounding lug under the screw of the outlet cover plate (see figure c).
CAUTION: Before using an adapter, it must be determined that the outlet cover plate screw is
properly grounded. If in doubt, consult a licensed electrician. Never use an adapter unless you are
sure it is properly grounded.
NOTE: USE OF AN ADAPTER IS NOT PERMITTED IN CANADA. 220-240 volt “GS Safety
Approved” units are supplied with a molded European grounding-type plug (CEE 7/7).
220-240 volt standard units are supplied without a plug, and an appropriate one must be installed by user
in accordance with local electrical codes:
NOTE: USER-INSTALLED CORDSET PLUGS ARE NOT PERMITTED IN EUROPE.
GROUNDING INSTRUCTIONS
• For your protection, this appliance is equipped with a 3-conductor cordset.
• 120 volt units are supplied with a molded 3-prong grounding-type plug, and should be used in
combination with a properly connected grounding-type outlet as shown in Figure A.
If a grounding-type outlet is not available, an adapter, shown in Figure B, may be obtained to
enable a 2-slot wall outlet to be used with a 3-prong plug.
Referring to Figure C, the adapter must be grounded by attaching its grounding lug under the
screw of the outlet cover plate.
CAUTION: Before using an adapter, it must be determined that the outlet cover plate screw is
properly grounded. If in doubt, consult a licensed electrician.
Never use an adapter unless you are sure it is properly grounded.
NOTE: USE OF AN ADAPTER IS NOT PERMITTED IN CANADA.
• 240 Volt units are supplied without a plug, and an appropriate one must be installed by user in
accordance with local electrical codes observing the following cordset conductor color coding:
GREEN/YELLOW: EARTH GROUND BLUE: NEUTRAL BROWN: LIVE