Waring FP40C - Manual (Page 6)

6
THE PARTS
The Waring ® FP40 and FP40C food processors are compact, easy-to-use appliances. Completely assembled,
the FP40 is only 21" high (53.3cm) and stores conveniently when not in use. For more compact
storage, the cover can be stored upside down with the feed tube in the bowl. When stored this way, the unit
is only 15 1 ⁄
2
" high (39.4 cm).
The Waring FP40 and FP40C food processors both consist of the following standard parts and accessories:
1. Solid Polycarbonate Motor Base with vertical stainless steel shaft
2. Two Control Levers
a. ON
b. PULSE/OFF
3. Safety Interlock Tower
Prevents machine from operating until cover is in place
4. Clear Work Bowl with 8" diameter (20.3cm)
Dry capacity of 4 quarts
Wet capacity of 3.8 quarts
5. Clear Work Bowl Cover
a. Large-Feed Kidney-Shaped Feed Tube for maximum use of cutting surface
6 1 ⁄
8
" (15.5 cm) x 3" (7.6 cm) wide
b. Large Pusher with full size and reduced size feed options
c. Small Pusher within the large pusher for smaller vegetables and pepperoni, etc.
Note: This combination pusher allows use of the entire feed tube for
large foods and provides controlled processing for small diameter foods
such as carrots, celery and pepperoni.
6. Sharp and durable S-Blade (Cutter Blade) to chop, grind, purée, mix and knead
7. 3 mm, 1 ⁄
8
" Slicing Disc
8. 5 mm, 3 ⁄
16
" Shredding Disc
9. Safety Reset Switch
The FP40C comes with these additional components:
10. Continuous Feed Chute
11. Clear Cover for Feed Chute
12. Slinger