LaMotte 2020i Turbidimeter - Manual (Page 38)

MAINTENANCE
Cleaning
Clean meter with a damp, lint-free cloth.
DO NOT ALLOW WATER TO ENTER THE METER CHAMBER OR ANY OTHER PARTS
OF THE METER.
Clean meter chamber and lenses over LEDs with a lint-free cloth slightly dampened
with alcohol.
Repairs
Should it be necessary to return the meter for repair or servicing, pack the meter
carefully in a suitable container with adequate packing material. A return authorization
number must be obtained from LaMotte Company by calling 800-344-3100 (US only)
or 410-778-3100, faxing 410-778-6394, or emailing [email protected]. Often a
problem can be resolved over the phone or by email. If a return of the meter is
necessary, attach a letter with the return authorization number, meter serial number, a
brief description of problem and contact information including phone and FAX
numbers to the shipping carton. This information will enable the service department to
make the required repairs more efficiently.
Meter Disposal
Waste Electrical and Electronic Equipment (WEEE)
Natural resources were used in the production of this equipment. This equipment may
contain materials that are hazardous to health and the environment. To avoid harm to
the environment and natural resources, the use of appropriate take-back systems is
recommended. The crossed out wheeled bin symbol on the meter encourages you to
use these systems when disposing of this equipment.
Take-back systems will allow the materials to be reused or recycled in a way that will
not harm the environment. For more information on approved collection, reuse, and
recycling systems contact your local or regional wase administration or recycling
service.
38 MAINTENANCE