LaMotte 2020i Turbidimeter - Manual (Page 39)

GENERAL INFORMATION
Packaging and Delivery
Experienced packaging personnel at LaMotte Company assure adequate protection
against normal hazards encountered in transportation of shipments.
After the product leaves LaMotte Company, all responsibility for safe delivery is assured
by the transportation company. Damage claims must be filed immediately with the
transportation company to receive compensation for damaged goods.
General Precautions
READ THE INSTRUCTION MANUAL BEFORE ATTEMPTING TO SET UP OR
OPERATE THE METER. Failure to do so could result in personal injury or damage to
the meter. The meter should not be used or stored in a wet or corrosive environment.
Care should be taken to prevent water from wet tubes from entering the meter
chamber.
NEVER PUT WET TUBES IN THE METER.
Safety Precautions
Read the label on all reagent containers. Some labels include precautionary notices
and first aid information. Certain reagents are considered potential health hazards and
are designated with a * in the instruction manual. To view or print a Material Safety
Data Sheet (MSDS) for these reagents see MSDS CD or go to www.lamotte.com. To
obtain a printed copy, contact LaMotte by e-mail
, phone or FAX. Additional
information for all LaMotte reagents is available in the United States, Canada, Puerto
Rico, and the US Virgin Islands from Chem-Tel by calling 1-800-255-3924. For other
areas, call 813-248-0585 collect to contact Chem-Tel’s International access number.
Each reagent can be identified by the four-digit number listed on the upper left corner
of the reagent label, in the content list and in the test procedures.
Limits of Liability
Under no circumstances shall LaMotte Company be liable for loss of life, property,
profits, or other damages incurred through the use or misuse of their products.
GENERAL INFORMATION 39