ClearOne Interact Manual - Manual (Page 24)

Chapter 2: Getting Started 19
NETWORK CONNECTION
Network Connection allows you to connect to any INTERACT system on your network using an IP address or
a unique network name.
Using Network Find
o
pen The
n
eTwork
f
ind
Click the Network Find button on the toolbar (or use the menu option Tools->Network Find).
» NOTE: INTERACT Software will automatically detect units located on the same subnetwork.
You only need to use Network Find to locate units outside of the subnetwork. This is based on
the assumption that your LAN is configured correctly. If your LAN is not configured correctly,
please refer to your IT Administrator.
C
onneCT To a
s
ysTeM on The
n
eTwork
1. Enter the IP Address or Network Name of the system to which you want to connect.
2. Click Ok.
3. You will see a Password Prompt window. Enter the User Name and Password of the networked
system.
4. Click Ok. The system icon will appear in the Connection list and the Configuration screen will open.
PHONEBOOK
INTERACT Software features a Phonebook utility which stores up to 20 phone numbers. These numbers are
also assigned a speed dial number for dialing convenience through the INTERACT Controller. Phonebook
entries are listed in alphabetical order, speed dial number or number. You can add, edit or delete an entry
from the Phonebook window.
Phonebook Edit
o
pen The
p
honebook
• Click the Phonebook button on the toolbar (or use the menu option Tools->Phonebook Edit).
a
dd a
n
uMber
1. Click Add
2. Enter the Name and Number.
3. Enter a Speed Dial Number (1-20). If you don’t enter a speed dial number, INTERACT Software will
automatically assign one. Alternatively, the user can assign a speed dial number of None which will
prevent a speed dial number from being assigned.
4. Click Ok
d
eleTe a
n
uMber
1. Select the entry you want to delete.
2. Click Delete
e
diT a
p
honebook
e
nTry
1. Select the entry you want to edit, click Edit.
2. Make desired changes to the entry.
3. Click Ok. Confirm the deletion.