Great Plains DVN8552 Operator Manual User Manual

Page 3

Advertising
background image

Great Plains Manufacturing, Inc.

Cover

Index

iii

2014-02-12

550-353M

©

Copyright 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014 All rights Reserved

Great Plains Manufacturing, Inc. provides this publication “as is” without warranty of any kind, either expressed or implied. While every precaution has been
taken in the preparation of this manual, Great Plains Manufacturing, Inc. assumes no responsibility for errors or omissions. Neither is any liability assumed for
damages resulting from the use of the information contained herein. Great Plains Manufacturing, Inc. reserves the right to revise and improve its products as
it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future.

Trademarks of Great Plains Manufacturing, Inc. include: Singulator Plus, Swath Command, Terra-Tine.

Registered Trademarks of Great Plains Manufacturing, Inc. include:

Air-Pro, Clear-Shot, Discovator, Great Plains, Land Pride, MeterCone, Nutri-Pro, Seed-Lok, Solid Stand,

Terra-Guard, Turbo-Chisel, Turbo-Chopper, Turbo Max, Turbo-Till, Ultra-Till, Verti-Till, Whirlfilter, Yield-Pro.

Brand and Product Names that appear and are owned by others are trademarks of their respective owners.

Printed in the United States of America

Table of Contents

Important Safety Information ......................................1
Safety Decals .................................................................5
Introduction ...............................................................10
Models Covered ...........................................................10
Description of Unit ........................................................10

Document Family......................................................10

Using This Manual........................................................10

Definitions.................................................................10

Owner Assistance ........................................................11
Preparation and Setup ...............................................12
Prior to Going to the Field Checklist.............................12
Hitching Tractor to Discovator ......................................13

Hydraulic Hose Hookup............................................14
Hose Handles ...........................................................14

First Time Field Adjustments........................................14

Pre-Leveling of Machine.......................................14

Front to Rear Leveling ..............................................14

Side to Side Leveling............................................15

Disc Gang Depth Calibration ....................................15
Field Operation of Disc Gangs .................................16

Operating Instructions...............................................17
Pre-Start Checklist .......................................................17

Transporting ................................................................. 17

Check Tractor Capacity and Configuration .............. 17
Transport Checklist .................................................. 17

General Operation and In-Field Adjustments............... 18
Scraper Settings .......................................................... 18
Rear Attachment Settings ............................................ 18

Spike Drag Settings ................................................. 18
HD Spike & Reel Settings ........................................ 19
Coil Tine Settings ..................................................... 19
Reel Settings............................................................ 19

Maintenance and Lubrication ................................... 20
Maintenance ................................................................ 20
Lubrication ................................................................... 20
Troubleshooting......................................................... 22
Discovator Trouble Shooting Charts ............................ 22
Appendix..................................................................... 26
DV Specifications and Capacities ................................ 26
Tire Inflation and Warranty........................................... 26
Hydraulic Connectors and Torque ............................... 27
Torque Values Chart .................................................... 28
Warranty ...................................................................... 29
Index............................................................................ 31

Advertising