Great Plains 2N-3020 Predelivery Manual - Manual (Page 2)

Table of Contents
© Copyright 1998 All rights Reserved
Great Plains Manufacturing, Inc. provides this publication “as is” without warranty of any kind, either expressed or implied. While every precaution has been taken in the preparation
of this manual, Great Plains Manufacturing, Inc. assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the informa-
tion contained herein. Great Plains Manufacturing, Inc. reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the
time of its publication, and may not reflect the product in the future.
Great Plains Manufacturing, Incorporated Trademarks
The following are trademarks of Great Plains Mfg., Inc.: Application Systems, Ausherman, Land Pride, Great Plains
All other brands and product names are trademarks or registered trademarks of their respective holders.
Printed in the United States of America.
Great Plains Mfg., Inc.
Table of Contents
Models 2410, 3010, 2420 and 3020 Folding No-Till Drill 196-202M 1/3/06
Important Safety Information. . . . . . . . . . . . . . . . . . 1
Safety Notations . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Safety Rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Description of Unit . . . . . . . . . . . . . . . . . . . . . . . . 2
Using This Manual . . . . . . . . . . . . . . . . . . . . . . . . 2
Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Assembly and Setup Assistance . . . . . . . . . . . . . 2
Section 1 Assembly . . . . . . . . . . . . . . . . . . . . . . . . . 3
Tools Required . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Pre-Assembly Checklist . . . . . . . . . . . . . . . . . . . . 3
Hook Up Drill Control Console . . . . . . . . . . . . . . . 3
Assemble Drill Frame and Boxes . . . . . . . . . . . . . 4
Plumb Field-Lift Hydraulics. . . . . . . . . . . . . . . . . . 5
Section 2 Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Bleed Field-Lift Hydraulics . . . . . . . . . . . . . . . . . . 6
Bleed Transport-Lock Hydraulics . . . . . . . . . . . . . 6
Bleed Lift-to-Fold Hydraulics . . . . . . . . . . . . . . . . . 7
Bleed Fold Hydraulics . . . . . . . . . . . . . . . . . . . . . . 7
Level the Drill . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Align Boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Make Folding Adjustments . . . . . . . . . . . . . . . . . 10
Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Tire Inflation Chart . . . . . . . . . . . . . . . . . . . . . . . 11
Torque Values Chart for Common Bolt Sizes . . . 11