Great Plains 2N-3020 Predelivery Manual - Manual (Page 4)

2
Introduction
Models 2410, 3010, 2420 and 3020 Folding No-Till Drill 196-202M 1/3/06
Great Plains Mfg., Inc.
Introduction
Definitions
Right and left as used in this manual are determined by
facing the direction the machine will travel while in use un-
less otherwise stated.
IMPORTANT: A crucial point of information related to
the preceding topic. For safe and correct operation,
read and follow the directions provided before continu-
ing.
NOTE: Useful information related to the preceding topic.
Assembly and Setup Assistance
To order additional dealer assembly instructions or opera-
tor’s and part manuals, write to the following address. In-
clude model numbers in all correspondence.
If for any reason you do not understand any part of this
manual or have other assembly or setup questions, assis-
tance is available. Contact
Product Support
Great Plains Mfg. Inc., Service Department
PO Box 5060
Salina, KS 67402-5060
Great Plains Manufacturing wants you to be satisfied with
any new machine delivered by the Great Plains Trucking
network. To ease the assembly task and produce a prop-
erly working machine, read this entire manual before as-
sembling or setting up new equipment.
Description of Unit
The 2-section, no-till, folding drill is a towed seeding imple-
ment for no- or minimum-till soil conditions. The drill is
equipped with two hydraulic circuits. One is used to raise
and lower the drill for field operations. The second circuit is
electro-hydraulic and used to lift, lock and fold the imple-
ment for transport. An in-cab control console allows the
operator to switch between functions on the electro-hy-
draulic circuit. The drill is outfitted with no-till coulters and
double-disk openers. Press wheels follow the opener
disks to firm the seedbed and control seeding depth.
Using This Manual
This manual was written to help you assemble and pre-
pare the new machine for the customer. The manual in-
cludes instructions for assembly and set up. Read this
manual and follow the recommendations for safe, efficient
and proper assembly and setup. Read and understand
“Important Safety Information” in the operator’s manual
before assembling the machine. For your safety and better
understanding of the machine, also read the operator’s
manual before assembling.
The information in this manual was current at printing.
Some parts may change to assure best performance.