Great Plains 2SNG30 Operator Manual - Manual (Page 8)

2SNG24 & 2SNG30
202-499m 8/17/2006
6
Safety At All Times
Thoroughly read and understand the instructions
in this manual before operation. Read all instruc-
tions noted on the safety decals.
▲ Be familiar with all drill functions.
▲ Operate machinery from the driver’s seat only.
▲ Do not leave drill unattended with tractor
engine running.
▲ Do not dismount a moving tractor. Dismount-
ing a moving tractor could cause serious injury
or death.
▲ Do not stand between the tractor and drill dur-
ing hitching.
▲ Keep hands, feet and clothing away from
power-driven parts.
▲ Wear snug-fitting clothing to avoid entangle-
ment with moving parts.
▲ Make sure all persons are clear of working
area.
▲ Do not turn tractor too tightly, causing drill to
ride up on wheels. This could cause personal
injury or equipment damage.
Safety Decals
Your implement comes equipped with all safety
decals in place. They were designed to help you
safely operate your implement.
▲ Read and follow decal directions.
▲ Keep all safety decals clean and legible.
▲ Replace all damaged or missing decals. Order
new decals from your Great Plains dealer.
Refer to this section for proper decal place-
ment.
▲ When ordering new parts or components, also
request corresponding safety decals.
▲ To install new decals:
1. Clean the area on which the decal is to be
placed.
2. Peel backing from decal. Press firmly on
surface, being careful not to cause air
bubbles under decal.