Great Plains 800 Operator Manual - Manual (Page 45)

Great Plains Manufacturing, Inc. Table of Contents Index Maintenance and Lubrication 41
2011-10-25 Table of Contents Index 175-057M
Seed Flap Replacement
Current Drill Model Flap
Refer to Figure 36
To replace a seed flap
, use needle nose pliers or
similar tool to grasp “T” top of flap. Pull upward to remove
flap from metal bracket
.
Push new seed flap down through metal bracket
until flap snaps into place with “T” top resting on top of
bracket.
If a seed firmer is also installed, it may be necessary to
shorten the flap.
Older Drill Model Flap
Refer to Figure 37
To replace a seed flap
use a needle nose or similar
tool and squeeze the tabs together. Pull plastic seed
flap down out of metal bracket .
Push new seed flap up through metal bracket until
tabs on seed flap snap in place.
Figure 36
Seed Tube Flap
31047
2
1
1
2
1 2
Figure 37
Seed Tube Flap
19398
3
2
1
2
1
2
1 3
1 3
2