Great Plains 800 Operator Manual - Manual (Page 51)

Great Plains Manufacturing, Inc. Table of Contents Index Maintenance and Lubrication 47
2011-10-25 Table of Contents Index 175-057M
Right End-Wheel Bearings
2 races
Type of Lubrication: Grease
Quantity: Repack
Gearbox
The gearbox is lubricated and sealed at the factory.
Under normal conditions, it does not require
maintenance or lubrication.
If the gearbox has been opened for repair, repack all
gears and around shaft bearings using at least 7 oz. of
gear lube, part number 788067.
Keep moisture and dirt out of gearbox. Inspect (replace if
needed) the rubber seals on gearbox drive and shifter
shafts.
Spread a small skim coat of anaerobic sealant
(Loctite
®
525 or equivalent) to gear case mating
surfaces before bolting them back together.
2-3 Years
28071
On Repair
14757
Use sparingly. Excess sealant may squeeze off the intended
surface and lock bearings or gears.