Great Plains EWNT7 1523Q-1630Q Operator Manual - Manual (Page 2)

EWNT7 and EWNT10 End Wheel No Till Drill 150-082M-A 4/25/06 Great Plains Mfg., Inc.
General Information
Great Plains Manufacturing, Inc. provides this publica-
tion “as is” without warranty of any kind, either ex-
pressed or implied. While every precaution has been
taken in the preparation of this manual, Great Plains
Manufacturing, Inc. assumes no responsibility for errors or
omissions. Neither is any liability assumed for damages
resulting from the use of the information contained here-
in. Great Plains Manufacturing, Inc. reserves the right to
revise and improve its products as it sees fit. This publi- cation describes the state of this product at the time of its
publication, and may not reflect the product in the future.
Printed in the United States of America.
For your convenience, record your Serial Number, Mod-
el Number and the Date Purchased in the spaces pro-
vided below. Have this information available when
calling your Great Plains Authorized Dealer.
Important Notice
This Operator’s Manual applies to the
7’ & 10’ End Wheel No-Till
Owner’s Information
Name: _____________________________________
Address ____________________________________
City ________________ State ____ Zip ___________
Phone_______________________
Name of Dealership ___________________________
Dealer’s Name _______________________________
Address ____________________________________
City ________________ State ____ Zip ___________
Phone_______________________
Serial Number ________________
Model Number ________________
Date Purchased _______________