Great Plains TCN5313 Assembly Manual - Manual (Page 8)

566-170Q-ENG 03/17/2014
4 TCN5107-5313 Great Plains Manufacturing, Inc.
Introduction
The Turbo-Chisel TCN has been designed with care and
built by skilled workers using quality materials. Proper
setup, maintenance, and safe operating practices will help
the customer get years of satisfactory use from the
machine.
Description of Unit
The TCN5107-5313 Turbo-Chisel is a one or three-section
“vertical” tillage tool. Working width ranges from 9 to 17
feet. The implement is designed to cut, size and bury resi-
due. It can work up to 11” deep, will dislodge rootballs and
leave the field smooth enough for “one pass” finishing in
Spring. For optimum leveling of your machine, it should be
equipped with either a Chopper Reel or Buster Bar attach-
ment.
Models Covered
Document Family
Tools Required
• Basic Hand Tools
• Torque Wrench
• Fork Truck, Overhead Hoist or Loader
Pre-assembly Checklist
1. Before assembling, read and understand “Important
Safety Information” in front part of this manual.
2. Have at least two people on hand while assembling.
3. Make sure area is level and free of obstructions
(preferably an open concrete area).
4. Have all major componets
5. Have all fasteners and pins shipped with Discovator.
TCN5107 15-Foot 1-section
TCN5309 18-Foot 3-section
TCN5311 21-Foot 3-section
TCN5313 24-Foot 3-section
566-170Q-ENG Assembly Manual (this document)
566-170Q Pre-Delivery Manual
566-170M Operator Manual
566-170P Parts Manual
Figure 1
Turbo-Chisel
41977