Great Plains 4000TT Operator Manual - Manual (Page 53)

Great Plains Mfg., Inc. Table of Contents ►
Section 3: Replacement Parts
12/15/2004 Series I 1000TT - 4000TT Turbo-Till 586-043M
51
3000TT Center Transport & 4000TT Wing Transport Assembly
Ref. Kent No. GP Part No. Part Description
Comments
1. FC1812 570-056D Spindle, 2 3/4 x 17 (Q60-8B)
2. FC1827 816-220C Seal, (CR27362)
3. 822-110C Inner Cone, (JLM506849)
4. 822-109C Inner Cup, (JLM506810)
5. 800-130C Grease Zerk, 1/8-27 MPT
6. 815-176C Hub 8-Bolt(608) w/Brgs, Nuts, Cap
FC1813 815-164C 8-Bolt Hub Casting w/cups W60-8 Replaced by 815-176C
7. 803-219C Lug Nut, 5/8-18 x 90
8. FC0426 822-053C Outer Cup, (LM501310)
9. FC0248 822-048C Outer Cone, (LM501349)
10. 913624 148-404D Washer, Spindle 1”
11. 805-017C Cotter Pin, 3/16 x 1 3/4
12. 803-095C Slotted Hex Nut, 1”-14
13. 890-277C Dust Cap
14. 815-194C Hub 8-Bolt Spindle 2.75x17 608 Include items 1 thru 13
FC1826 570-220S Replaced by 815-194C
15. 802-802C Hex Bolt, 5/16-18 x 4 Gr.8
110564 802-279C Hex Bolt, 5/16 x 4 Gr.5 Changed to 802-802C
16. 3005 803-008C Hex Nut, 5/16
17. 4105 804-009C Lock Washer, 5/16
18. FC1836 814-223C Rim, 15 x 10, 8-Bolt, 3/8+ Offset
19. FC1769 814-227C Tire, 12.5L x 15, Load “F” 3000TT Center
814-247C Tire, 12.5L x 15, 12-ply 4000TT Wing
20. FC2282 814-256C 12.5L x 15 x 10 Load “F” Tire & Wheel Assy. Include items 18 & 19
814-248C 12.5L x 15 x 10 12-ply Tire & Wheel Assy. Include items 18 & 19
Legend: = 1st revision; = 2nd revision, = 3rd revision; use up existing stock;
⊗ not interchangeable; ⊗
Revision 2 is not interchangeable with 1
2/09/2006