Great Plains 2335SC Predelivery Manual - Manual (Page 10)

6 2112-2335SC Great Plains Manufacturing, Inc.
540-072Q 10/08/2013
Shipping
Refer to Figure 3
• The Seedbed Conditioner will be shipped with reels
attached to frames.
• The hitch will come pre-assembled on all models and
will have to be attached to center frame assembly.
• Models 2112, 2115 will be shipped with hydraulic sys-
tem fully charged and completely assembled except
for hitch assembly.
• Models 2317-2322 will also be shipped fully charged
with wings attached in transport position.
• Models 2325-2335 sill be shipped with all hoses
hooked up but the hydraulic system will not be
charged and wings will be detached and banded
together.
• Carefully remove unit from truck.
• Un-band unit and locate all parts.
Assembly and Setup Assistance
To order additional copies of pre-delivery instructions or
operator’s and parts manuals, write to the following
address. Include model numbers in all correspondence.
If you do not understand any part of this manual or have
any assembly or setup questions, assistance is available.
Contact:
Product Support
Great Plains Mfg. Inc., Service Department
PO Box 5060
Salina, KS 67402-5060
(800)255-9215
Figure 3
Shipping
42815