Great Plains 2335SC Predelivery Manual - Manual (Page 3)

Great Plains Manufacturing, Inc. iii
10/08/2013 540-072Q
© Copyright 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013 All rights Reserved
Great Plains Manufacturing, Inc. provides this publication “as is” without warranty of any kind, either expressed or implied. While every precaution has been
taken in the preparation of this manual, Great Plains Manufacturing, Inc. assumes no responsibility for errors or omissions. Neither is any liability assumed for
damages resulting from the use of the information contained herein. Great Plains Manufacturing, Inc. reserves the right to revise and improve its products as
it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future.
Trademarks of Great Plains Manufacturing, Inc. include: Singulator Plus, Swath Command, Terra-Tine.
Registered Trademarks of Great Plains Manufacturing, Inc. include:
Air-Pro, Clear-Shot, Discovator, Great Plains, Land Pride, MeterCone, Nutri-Pro, Seed-Lok, Solid Stand,
Terra-Guard, Turbo-Chisel, Turbo-Chopper, Turbo Max, Turbo-Till, Ultra-Till, Verti-Till, Whirlfilter, Yield-Pro.
Brand and Product Names that appear and are owned by others are trademarks of their respective owners.
Printed in the United States of America
Table of Contents
Important Safety Information ......................................1
Introduction ..................................................................4
Description of Unit ..........................................................4
Models Covered .............................................................4
Document Family ...........................................................4
Tools Required ...............................................................4
Pre-assembly Checklist..................................................4
Using This Manual..........................................................5
Definitions...................................................................5
Shipping .........................................................................6
Assembly and Setup Assistance ................................6
Assembly ......................................................................7
Hitch & SMV ...................................................................7
Hydraulic Hose & Light Harness ....................................7
2325-2335 Wings ...........................................................8
Attach Hose Clamps and Hose Wraps .......................8
Hydraulic Hose Hookup..............................................9
Hose Handles .............................................................9
2325-2335 Purging Hydraulic System ......................10
Completing Setup ........................................................ 10
Reel Shipping Blocks ............................................... 10
Spring Pre-Load ....................................................... 11
Light Bracket ............................................................ 11
Appendix - Reference Information ........................... 12
Torque Values Chart .................................................... 12
Tire Inflation Chart ....................................................... 13
Hydraulic Connectors and Torque ............................... 13
2112SC Machine Layout.............................................. 14
2115SC Machine Layout.............................................. 15
2317SC Machine Layout.............................................. 16
2320SC Machine Layout.............................................. 17
2322SC Machine Layout.............................................. 18
2325SC Machine Layout.............................................. 19
2327SC Machine Layout.............................................. 20
2330SC Machine Layout.............................................. 21
2332SC Machine Layout.............................................. 22
2335SC Machine Layout.............................................. 23
Index........................................................................... 25