Great Plains 4000TC Operator Manual - Manual (Page 21)

08/01/2012 Table of Contents Index 586-239M
Great Plains Manufacturing, Inc. Table of Contents Index 17
Operating Instructions
This section covers general operating procedures. Expe-
rience, machine familiarity, and the following information
will lead to efficient operation and good working habits.
Always operate farm machinery with safety in mind.
Pre-Start Checklist
Perform the following steps before transporting the 1200-
4000TC Turbo-Chopper to the field.
❑ Carefully read “Important Safety Information” on
page 1.
❑ Lubricate Turbo-Chopper as indicated under “Lubri-
cation” on page 26.
❑ Check all tires for proper inflation, “Tire Inflation &
Warranty” on page 30.
❑ Check all bolts, pins, and fasteners. Torque as
shown in “Torque Values Chart” on page 32.
❑ Check Turbo-Chopper for worn or damaged parts.
Repair or replace parts before going to the field.
Check hydraulic hoses, fittings, and cylinders for leaks.
Repair or replace before going to the field.
High Pressure Fluid Hazard:
Relieve pressure and shut down tractor before connecting, dis-
connecting or checking hydraulic lines. Use a piece of paper
or cardboard, NOT BODY PARTS, to check for leaks. Wear
protective gloves and safety glasses or goggles when working
with hydraulic systems. Escaping fluid under pressure can
have sufficient pressure to penetrate the skin causing serious
injury. If an accident occurs, seek immediate medical assis-
tance from a physician familiar with this type of injury.