Great Plains 8030P G1021 Operator Manual - Manual (Page 2)

60303P and 80303P Three-Point Planter 401-008M 5/15/06 Great Plains Mfg., Inc.
General Information
General Information
Great Plains Manufacturing, Inc. provides this publica-
tion “as is” without warranty of any kind, either
expressed or implied, while every precaution has been
taken in the preparation of this manual, Great Plains
Manufacturing, Inc. assumes no responsibility for errors
or omissions. Neither is any liability assumed for damag-
es resulting from the use of the information contained
herein. Great Plains Manufacturing, Inc. reserves the
right to revise and improve its products as it sees fit. This publication describes the state of this product at the time
of its publication, and may not reflect the product at all
times in the future.
Printed in the United States of America.
For your convenience, record your serial number, model
number and the date purchased in the spaces provided
below. Have this information before you when calling a
Great Plains Authorized Dealer.
Important Notice
This Operator’s Manual applies to the 6-Row/8-Row 3-Point Planter listed below:
401-001A 6-Row 30" Planter
401-002A 8-Row 30" Planter
Owner’s Information
Name: _____________________________________
Address ____________________________________
City ________________ State ____ Zip ___________
Phone_______________________
Name of Dealership ___________________________
Dealer’s Name _______________________________
Address ____________________________________
City ________________ State ____ Zip ___________
Phone_______________________
Serial Number _______________________________
Model Number _______________________________
Date Purchased ______________________________