Ground drive sensor installation, Remove components from work area – Great Plains PD8070 User Manual
Page 2
Advertising
Great Plains Mfg., Inc.
2
Update Kit
402-231M
02/02/2007
Ground Drive Sensor Installation
Remove Components from Work Area
4.
On the left hand contact drive, gain access to the
area to be updated by, removing and saving the:
KNOB, TRANS. SHIELD
LH CONTACT DRIVE CHAIN COVER
5.
Loosen the idlers
6.
Remove the chain
from the drive sprocket
and let it hang toward the idlers.
7.
At the contact wheel shaft, remove and save one
each of these existing parts:
PIN COTTER 1/4 X 2 PLT
SPKT 40C15 X 7/8 HEX BORE
WASHER FLAT SAE 1
Figure 2
Remove Cover
26002
Figure 3
Dismount Sprocket & Washer
16863
1
2
59
Figure 4
Dismount Sprocket & Washer
25493
1
Advertising