Great Plains PD8070 - Manual (Page 6)

Great Plains Mfg., Inc.
6 Update Kit
402-231M 02/02/2007
Route Cable
Refer to Figure 14 and consult the installation instructions in the
DICKEY-john manual for the seed monitor.
27. Select one each new:
833-452C DJ SENSOR TO RADAR 15.5 EXT
833-453C DJ RADAR EXTENSION 25 FT.
and all of the new:
800-244C CABLE TIE .19X15 PANDU BT4S-C0
28. Connect one end of the 4.7m (15.5ft) sensor-to-
radar lead (the shorter cable) to the sensor
(not shown).
29. Route the other end of to the tongue. Keep it
clear of moving parts. Allow slack at machine hinge
and pivot points (follow the seed tube sensor cable
bundles).
30. Connect one end of the 7.6m (25ft) extension lead
to the DICKEY-john seed monitor in the tractor
cab.
31. Route the other end along the existing cable bun-
dle to the planter tongue. Use any slack to provide
extra clearance near moving and flexing parts.
32. Use the cable ties to secure the cable. Do not
tie any part of cable to the tractor. Do not tie
any part of cable to the planter.
33. Connect sensor/planter cable to tractor/seed
monitor cable .
Figure 14
Route Cables
99999
23 22
22
23
16
22
21
22
23
16
22
23
22
23