Great Plains DVN8324 Predelivery Manual - Manual (Page 15)

Great Plains Manufacturing, Inc. Assembly 11
11/25/2013 550-466Q
Install Rear Hitch (optional)
Note: The rear tow hitch will be shipped with big compo-
nents banded together and bolts will be in a box.
Carefully un-band the components.
Refer to Figure 10
49. Attach left
and right rear hitch arms, rear hitch
truss , rear truss support to center frame using
5/8 x 1 1/2 bolts , 5/8 x 3 1/32 x 5 1/2 u-bolts ,
secure with 5/8 lock washers and 5/8 nuts.
Note: Do not tighten any bolts until every thing is
installed.
50. Now install the rear hitch frame using 5/8 x 1 1/2
bolts , 5/8 x 4 1/32 x 4 1/4 u-bolts , secure with 5/
8 lock washers and 5/8 nuts.
51. The bolt on sleeve assembly with rigid or flex slide
may be fastened using 5/8 x 3 1/32 x 4 1/2 u-bolt ,
secure with 5/8 lock washers and 5/8 nuts.
52. Tighten all bolts to specs, See “Torque Values
Chart” on page 13.
53. If machine is equipped with optional rear hitch
accessory kit may be installed as shown in “Parts
Manual”.
54. Route hoses and light harness along hitch and frame
with hose clamps and hose wraps, provided.
Note: Be sure hoses and light harness is fastened
securely so they don’t drag or get pinched.
2 1
4 5
6 7
3
6 8
9
10
Figure 10
Rear Hitch 41637
8
9
4
6
1
5
7
6
9
6
7
2
6
3
6
10