Great Plains V300F Assembly Instructions - Manual

Great Plains Mfg., Inc.
Installation Instructions 1
©Copyright 2007 Printed 03/12/2007 148-772M
V300 Pivot Lock Upgrade
V300 and V300F Verti-Drills
Used with:
• Model year 2006 and earlier drills
General Information
These instructions explain how to install the V300 Pivot
Lock Upgrade. This kit provides more precise pivot
lockup for transport and slope drilling.
These instructions apply to:
Note: Your drill may not need all of the parts in this kit.
Some pre-2007 model drills already have
extended ear mounts. The instructions show how
to determine if parts do not need to be installed.
Due to shipping regulations, this kit cannot contain any
touch-up paint to restore welded areas. Your Great Plains
dealer can provide it as Great Plains part:
821-001C PAINT GP GREEN SPRAY CAN
If this part is not available in your locale, use a green
exterior enamel paint close to Pantone 356.
Before You Start
Each kit converts one drill.
For each kit, inventory the contents per the “Parts List”
on page 7.
Review the instructions, to make sure the steps are
understood and what tools are expected.
Have the following items at hand:
• Wire or stick welder and welding tarps
• Appropriate safety equipment, such welding mask
and gloves
• Basic hand tools, including welding clamps
• Original or updated Parts Manual for your implement
!
CAUTION
Fire hazard: hydraulic hoses, tires and boots near welding
sites must be removed or protected with welding tarps.
Notations and Conventions
Left and Right are facing in the direction of machine
travel during planting.
An orientation rose in the line art illus-
trations shows Left, Right, front, Back,
Up and Down.
callouts identify components in the currently
referenced Figure or Figures
to callouts reference new parts from the list on
page 7
to callouts reference existing parts. The
descriptions match those in your Parts manual.
Option Package Part Number
V300 PIVOT LOCK UPGRADE 148-773A
Figure 1
Site of Update on Drill
22574
U
D
F
B
L
R
1
11 18
51 57