Great Plains V300F Assembly Instructions - Manual (Page 3)

Great Plains Mfg., Inc.
Installation Instructions 3
03/12/2007 148-772M
Remove Old Pivot Lock
Refer to Figure 3
9. Remove any pin:
PIN WIRE SNAP LOCK 1/2 X 3 1/2
It is not re-used, but may be saved as a spare.
Note: Pin may not be present on all drills.
10. Remove and save one each on each side:
HHCS 5/8-11X2 1/2 GR5
NUT HEX NYLOCK 5/8-11 PLT
11. Remove one on each side:
FCP1000 PVT LOCK LUG
and if present, also remove:
PIVOT LOCK LATCH
Note: Although shown disassembled for clarity, the lug
, and any latch , do not require further disas-
sembly. The bolts, washers and nuts that connect
them are not re-used.
Installation
Attach Ear Mount Extensions
(If Necessary)
Refer to Figure 4
12. Compare the existing ear mounts on your drill to
those illustrated in Figure 4.
If they are style , they need to be extended with
the parts in this kit. Continue at step 13.
If they are style , they are already up to date.
These kit parts will be unused:
248-509D PIVOT LOCK EAR MNT EXTENSION
Skip to step 23.
13. Select four each new parts:
248-509D PIVOT LOCK EAR MNT EXTENSION
Figure 3
Remove Old Pivot Lock
26175
52
51
57
55
53
U
D
F
B
L
R
57
57
53
55
51
52
51 52
Figure 4
Possible Ear Mounts Present
26176
26177
1 2
U
D
F
B
L
R
1
2
14
14