Great Plains 2510HDF Operator Manual - Manual (Page 17)

Great Plains Manufacturing, Inc. Table of Contents Index Preparation and Setup 13
2013-11-11 Table of Contents Index 288-340M
Electrical Connections
Refer to Figure 3
7.
Plug drill electrical lead into tractor seven-pin
connector. If your tractor is not equipped with a
seven-pin connector, contact your dealer for
installation.
Refer to Figure 4
8.
If the drill is equipped with the optional shaft monitor,
mate the connector for the cab display.
See “Shaft Monitor Cab Module” on page 19 for
installation.
See “Shaft Monitor” on page 63 for ordering
information.
Figure 3
Lighting Connector
26467
Figure 4
Shaft Monitor Connector
26468