Great Plains 8-10m Press Range SN 11999-12005 - Manual (Page 12)

8-10m Press Range
Operating Instructions
12
connections between the tractor and the
machine should be colour-coded in order to
avoid incorrect use.
1.5.3 Changing Equipment
„ Secure the machine to prevent it from
accidentally rolling away!
„ Use suitable supports to secure any
raised frame sections suspended above
you!
„ Caution! Risk of injury due to projecting
parts!
Never climb on to rotating parts such
as the roll unit. These parts may
rotate causing you to slip and suffer
serious injury!
1.5.4 During Operation
Ensure that the working range and the area
around the machine are clear (children!)
before operating the machine.
Always ensure adequate visibility!
Do not stand on the machine while it is in
operation!
Operators must have a valid driving licence
in order to drive on public roads. In the
operating area, the operator is responsible
for third parties.
The person in charge must:
„ provide the operator with a copy of the
Operating Instructions, and
„ ensure that the operator has read and
understood the instructions.
„ make sure that the operator is aware of
the specific regulations relating to the
machine when driving on public roads.
1.5 Accident Prevention
In addition to the Operating Instructions, it is
important to observe the accident prevention
regulations specified by agricultural trade
associations.
1.5.1 Hitching-up the
machine
There is a risk of injury when hitching/
unhitching the machine. Observe the following:
„ Secure the machine against rolling.
„ Take special care when reversing the
tractor!
„ There is a risk of being crushed between
the machine and the tractor!
„ Park the machine on firm, level ground.
1.5.2 On the Hydraulic
System
Do not connect the hydraulic lines to the tractor
until both hydraulic systems (machine and
tractor) are depressurised.
Any hydraulic system containing an
accumulator can remain under
pressure permanently (even after
following manual depressurisation
procedures with a tractor /
implement combination). It is
therefore important to check all
lines, pipes, and screw
connections regularly for leaks and
any recognisable external
damage.
Only use appropriate aids when checking for
leaks. Repair any damage immediately.
Spurting oil can cause injuries and fires!
In case of injury, contact a doctor immediately.
The socket and plugs for the hydraulic
1. Safety Data