6 when driving on the road, 7 parking the machine – Great Plains 8-10m Press Range SN 11999-12005 User Manual
Page 18
8-10m Press Range
Operating Instructions
18
2. Transportation / Installation
2.6 When driving on the
road
When driving on the road the machine must
be converted to the transportation position.
When driving on the road, raise the
machine completely to prevent the
working elements dragging on the
ground.
2.7 Parking the machine
In order to avoid damage as a result of
moisture, the machine should be parked, if
possible, indoors or under cover.
When manoeuvring the machine,
pay attention to your surroundings.
Ensure that nobody is in the
manoeuvring area (watch for
children!).
Park with the machine on level solid
ground, if leaving parked for a long
period of time it is advised the machine
is left in the unfolded or work position.
Switch off the tractor. Fit the jack to the
jacking socket on the side of the
drawbar/ operate the hydraulic jack to
raise the drawbar from the jaw of the
tractor and remove the pin.
If the machine is being left folded on the
jack ensure the catcher arm tap (BLUE)
is left closed. Depressurise all hydraulic
lines and remove pipes and cables from
tractor.
Slowly draw the tractor forward.