Great Plains MF45 Operator Manual - Manual (Page 14)

1993+ MF30, MF40 & MF45
500-048M 4/15/2003
12
ditional torque specifications. Check to see that all
hose clamps are tight.
17. Fill the sprayer tank 1/4 full of water. Hook up the
pump to a tractor as described in the Sprayer Owner’s
Manual. Operate the pump with the control box boom
switches off and the agitation wide open. If unit is
equipped with solenoid throttling valves open throt-
tling valves full open. With the pump running, turn on
all the boom switches and flush out the boom lines be-
fore assembling the nozzles. Allow water to flow out of
all nozzles at least ten seconds to ensure all foreign
matter is removed from the plumbing.
18. Assemble the nozzles onto the nozzle check valves
and operate each section. If storing unit, refer to Stor-
age in the Sprayer Owner’s Manual.
Figure 2
Fold Bracket Assembly Illustration {3-Point}
14313
Figure 3
Fold Bracket Assembly Illustration {Single Axle}
11954