Great Plains 4000-3S Assembly Instructions User Manual
Page 3
Advertising
2/28/2006
113-728M
Great Plains Mfg., Inc.
3
Installation Instructions
18924
Figure 3
Second Marker Section to First Marker Section
Refer to Figure 3
7.
Assemble second marker section (6) to first
marker section (1) with 20 5/8" hinge pin (7). Fas-
ten with 5/16" x 2 1/4" bolt (8) and 5/16" lock nut
(9).
Refer to Figure 4
8.
Attach cylinder rod end to second marker sec-
tion with clevis pin (10), flat washers (11) and
cotter pin (12).
NOTE: Make sure cylinder pin lock (13) is positioned
under cylinder clevis pin (10).
Figure 4
Cylinder Rod End to Second Marker Section
Advertising