Great Plains CDA600 Operator Manual - Manual (Page 13)

11 Centurion CDA600
270-600M-ENG
2013-06-14
1.3 Operational Safety
The machine is to be put in operation only
after instruction has been provided by an
employee of the authorised dealer or an
employee of Great Plains. The “Machine
Registration” form is to be completed and
returned to your dealer.
All protective and safety equipment, such
as removable protective equipment, must
be in place and functioning reliably before
the machine is put in use.
Check screws and bolts regularly
for tightness and retighten if
necessary.
In the event of malfunctions,
stop and secure the machine
immediately.
Ensure that any faults are
remedied immediately.
1.2 Use for the Intended
Purpose
The Centurion is built using the latest
technology and in accordance with the
relevant recognised safety regulations.
However, risks of injury for the operator or
third parties and impairment of the machine
or other tangible assets can arise during
use.
The machine is only to be operated when
in a technically perfect condition and for the
intended purpose, taking into consideration
safety and risks and following the
Operating Instructions. In particular, faults
that can impair safety are to be remedied
immediately.
Original parts and accessories from Great
Plains have been specially designed for
this machine. Spare parts and accessories
not supplied by us have not been tested
or authorised. Installation or use of non-
original Great Plains products may have
a detrimental effect on specific design
features of the machine and affect the
safety of machine operators and the
machine itself. Great Plains will accept no
liability for damage resulting from the use
of non-original parts or accessories
.
The Centurion is designed solely as a
cultivation and seeding implement. Use
for any other purpose, e.g., as a means of
transport, will be deemed to be improper
use. Great Plains will accept no liability for
damage resulting from improper use. The
risk will be borne solely by the operator.
Use of the Centurion behind high power
tractors (in excess of 40% above the
maximum recommended) can lead to high
loads and stresses which can cause long
term structural damage to the chassis and
key components. Such overloading can
compromise safety and is to be avoided.
1. Safety Information