Great Plains TSF660 Predelivery Manual - Manual (Page 11)

11/7/2006 500-644Q
9 Assembly
Refer to Figure 2
3. Reattach transport bumper to top of transport
support weldment.
4. Secure transport bumper to transport support
weldment with previously removed bolt and
nut.
24163
Figure 2
Top of Transport Support Weldment
Refer to Figures 3 & 4
5. Unhook swivel bolt snap from stationary ring.
Re-hook swivel bolt snap to ring located in
outer boom lock plunger rod.
24164
24165
Figures 3 & 4
Swivel Bolt Snap
Refer to Figure 5
1. Cut plastic tie from foam marker drop hose, if
sprayer is equipped with foam marker.
NOTE: If the TSF660 is equipped with foam mark-
er, refer to the optional Foam Marker Kit manual
for installation information.
24166
Figure 5
Foam Marker Drop Hose