Great Plains TSF660 Predelivery Manual - Manual (Page 9)

11/7/2006 500-644Q
7 Introduction
Great Plains Manufacturing wants you to be satis-
fied with any new machine delivered by the Great
Plains Trucking network. To ease the assembly
task and produce a properly working machine,
read this entire manual before assembling or set-
ting up new equipment.
Description of Unit
The TSF660 sprayer is capable of spraying at
60’.The level float boom is fully suspended start-
ing with vertical spring suspension in a 42”
hydraulic elevator which provides a wide range of
boom height adjustment along with gas shocks
that provide side-to-side stability.
Intended Usage
Use these booms as part of a pressurized sprayer
system to apply liquid pesticides, herbicides or
fertilizers to production-agriculture crops only. Do
not modify sprayer for use with attachments other
than those approved by Great Plains.
Models Covered
TSF660
Using This Manual
This manual was written to help you assemble
and prepare the new machine for the customer.
The manual includes instructions for assembly
and setup. Read this manual and follow the rec-
ommendations for safe, efficient and proper
assembly and setup.
An operator’s manual is also provided with the
new machine. Read and understand “Important
Safety Information” and “Operating Instruc-
tions” in the operator’s manual before assembling
the machine. As a reference, keep the operator’s
manual on hand while assembling.
The information in this manual is current at print-
ing. Some parts may change to assure top
performance.
Definitions
The following terms are used throughout this
manual.
Right and left as used in this manual are deter-
mined by facing the direction the machine will
travel while in use unless otherwise stated.
IMPORTANT: A crucial point of information
about the preceding topic. For safe and correct
operation, read and follow the directions pro-
vided before continuing.
NOTE: Useful information about the preceding
topic.
Assembly and Setup Assistance
To order additional copies of predelivery instruc-
tions or operator’s and parts manuals, write to the
following address. Include model numbers in all
correspondence.
If you do not understand any part of this manual or
have other assembly or setup questions, assis-
tance is available. Contact
Product Support
Great Plains Mfg. Inc., Service Department
P.O. Box 5060
Salina, KS 67402-5060
Introduction