Great Plains V-300F Predelivery Manual - Manual (Page 17)

1/2/2006 148-057Q
15 Assembly
Figure 17
Removing Bolts
Weight Brackets
Refer to Figures 17 and 18
1. Remove bolts securing weight bracket to box
frame.
2. Turn weight bracket around and reattach to
box frame with bolts.
3. Repeat steps 1 and 2 for other weight bracket.
Hydraulic Hoses
NOTE: It is recommended that hydraulic hoses be
attached to both master and slave cylinders while
the box is still in the rack.
Refer to Figure 19
1. Using elbow fittings (4), attach 94” hose (3)
from base end of the master cylinder (1) to
rod end of slave cylinder (2).
2. Using elbow fittings (4), attach 250” hose (5)
to rod end of the master cylinder (1). Secure
hose to box frame temporarily
3. Using elbow fittings (4), attach 250” hose (5)
to base end of slave cylinder (2). Secure hose
to box frame temporarily.
23313
23318
Figure 18
Weight Bracket
23298
Figure 19
Hydraulic Hoses